Ontario construction safety log

Roofing Fall Protection Plan

A roofing fall protection plan sets out how roofers will be protected from falling before roof work starts and whenever the edge, access or weather changes: guardrails, travel restraint or fall arrest, anchors and rescue. Ontario's rules are in O. Reg. 213/91, which requires written rescue procedures before a fall arrest system is used (section 26.1(4)), plus approved Working at Heights training.

Published by Blue Crane Works. Last reviewed . Drafted with AI assistance from the official sources listed below; the answer above was checked against Ontario's e-Laws by the publisher.

Key facts

  • Work it coversRoofing fall protection controls
  • WhenBefore roofing work starts and whenever edge exposure, access, weather, or work area changes.
  • RuleO. Reg. 213/91 fall protection and roof work controls
  • Who signsSupervisor, workers, and rescue-role acknowledgement.
  • Keep itRetain with roofing project safety plan and orientation records.

When must the log be completed?

  • Required Timing: Before roofing work starts and whenever edge exposure, access, weather, or work area changes.
  • Supervisor Review: Assign a competent person or supervisor to review the entry before the next shift or before the controlled work resumes.
  • Change Trigger: Re-open the log when weather, equipment, excavation, access, crew, or work-method conditions change.

How do you complete the log?

  • Identify the Controlled Work: Record the site, date, crew, equipment, area, and trade activity.
  • Check the Hazard Controls: Confirm guards, access, PPE, training, permits, isolation, or inspection evidence required for the task.
  • Sign the Entry: Supervisor, workers, and rescue-role acknowledgement.
  • Store the Record: Retain with roofing project safety plan and orientation records.

Official sources

Every fact on this page traces back to a primary Government of Ontario source. Verify against the original before relying on it.