Ontario construction safety log

Fire Extinguisher Inspection Log

A fire extinguisher inspection log records the check of each extinguisher on site: location, access, charge and tag. Ontario's construction regulation, O. Reg. 213/91, sets fire protection rules for projects, including extinguishers where flammable materials are used or hot work is done, and sites usually check monthly and before releasing a hot work or fuel storage area.

Published by Blue Crane Works. Last reviewed . Drafted with AI assistance from the official sources listed below; the answer above was checked against Ontario's e-Laws by the publisher.

Key facts

  • Work it coversFire extinguisher inspection
  • WhenMonthly and before hot-work, fuel-storage, or high-risk ignition work areas are released.
  • RuleO. Reg. 213/91 fire protection and project emergency controls
  • Who signsSupervisor or competent worker acknowledgement for location, charge status, and access.
  • Keep itRetain with fire protection and hot-work records.

When must the log be completed?

  • Required Timing: Monthly and before hot-work, fuel-storage, or high-risk ignition work areas are released.
  • Supervisor Review: Assign a competent person or supervisor to review the entry before the next shift or before the controlled work resumes.
  • Change Trigger: Re-open the log when weather, equipment, excavation, access, crew, or work-method conditions change.

How do you complete the log?

  • Identify the Controlled Work: Record the site, date, crew, equipment, area, and trade activity.
  • Check the Hazard Controls: Confirm guards, access, PPE, training, permits, isolation, or inspection evidence required for the task.
  • Sign the Entry: Supervisor or competent worker acknowledgement for location, charge status, and access.
  • Store the Record: Retain with fire protection and hot-work records.

Official sources

Every fact on this page traces back to a primary Government of Ontario source. Verify against the original before relying on it.