Ontario construction safety log

Forklift Pre-Use Inspection Log

A forklift pre-use log is the operator's check of a forklift or other industrial truck before each shift: forks, chains, mast, hydraulics, tires, brakes, horn, lights and seatbelt. Under Ontario's OHSA the employer must keep equipment it provides in good condition (section 25(1)(b)), and the worker must report any defect that could endanger someone (section 28(1)(c)).

Published by Blue Crane Works. Last reviewed . Drafted with AI assistance from the official sources listed below; the answer above was checked against Ontario's e-Laws by the publisher.

Key facts

  • Work it coversForklift and powered industrial truck operation
  • WhenBefore each shift or first use by the assigned operator.
  • RuleOHSA equipment-duty principles and O. Reg. 213/91 equipment competency controls
  • Who signsOperator signature with supervisor review where site procedure requires it.
  • Keep itRetain with equipment inspection and maintenance records.

When must the log be completed?

  • Required Timing: Before each shift or first use by the assigned operator.
  • Supervisor Review: Assign a competent person or supervisor to review the entry before the next shift or before the controlled work resumes.
  • Change Trigger: Re-open the log when weather, equipment, excavation, access, crew, or work-method conditions change.

How do you complete the log?

  • Identify the Controlled Work: Record the site, date, crew, equipment, area, and trade activity.
  • Check the Hazard Controls: Confirm guards, access, PPE, training, permits, isolation, or inspection evidence required for the task.
  • Sign the Entry: Operator signature with supervisor review where site procedure requires it.
  • Store the Record: Retain with equipment inspection and maintenance records.

Official sources

Every fact on this page traces back to a primary Government of Ontario source. Verify against the original before relying on it.